Monday, November 16, 2015

Simple Lacey Beautifulness

Finally, another craft post!  I don't know that I enjoy writing them more than other types, but I like to get back into the groove of normality.  My last two posts (here and here) haven't been crafty (in the least!), and it makes me uncomfortable to publish two posts in a row that are not crafty.  I seriously dislike inconsistency.

All the way back in August, I mentioned doing a blog post on this card soon, because I used the same punch on that card as I'm using for this card, although how I used it differs from how I will use it here.  Although it is now too late to be called soon.

Here is the card when I first made it for my friend.  I love to have the words "love you" on cards.  However, since this card is mostly white and looks sort of lacy, I thought it would also work fantastically as a wedding thank you card!  The only thing you would have to change is which words you use.  All the words I used are from Tim Holtz Celebration Words Script dies, which are super fun.
For this post, I'm making two cards.  One with the words, "love you," and another with the words, "thank you."  Before you get any ideas though, I should tell you, I did not use the thank you card as a wedding thank you.  Just so you know...

I realized after cutting the paper for the new pair of cards, that I did them a different size than the original (above) card.  I decided to just go with it.  You choose which you like better (personally, I like the first better).  The first card was 4-1/2 by 4-1/4 inches, so there wasn't any un-punched space around the edges.  The second was 5 by 4-1/4 inches.  Of course, that's after they're folded, so you would cut the paper to 8-1/2 (two times 4-1/4) by 4-1/2 or 5 inches, and then fold it in half with those expert skillz you possess.  The overlay paper (as I will call it) should be the size of the card when it's folded.

The pictures basically tell you how to make this card, so my words will be kept at a minimum, but I shall add some in there when the going gets tough.  Such as...this below picture is simply of the cards and overlay paper before getting all fancied up.
Position the overlay paper on the bottom part of the punch.  This part may be a little tricky, only because you have to get it in the center as much as possible, without any exact way to do it.  Hopefully you're not super perfectionist-y like a certain someone called me.  It's really not that hard to do though.
This picture actually has no purpose.  I just like how it looks!
Make sure you hold the paper firmly when you put the top of the punch down, or else the paper could move.  The magnets are pretty strong.  (Okay, so maybe I'm adding in more words than I anticipated.)
Here you can see how the guides can help you punch multiple times without just guessing where to put the paper, and then horribly messing up.  I mean...not that you would do that...haha, of course you wouldn't...  But I would!  So guides are quite helpful.
All punched up and perdy!  In the original, there was no space on the top or bottom, and I really think it looked better.
Since there is extra space in the second version though, there's more space to put glue down, which is good.  SECURRITY, SECURRITY!  (...I suppose only some of you will get that...)
It's not completely necessary, but it's much easier to color in the words if you use a brush tip sharpie instead just a regular thick sharpie.  Haha, or you could simply die cut out of actual colored paper.  That's an option too.
Hope y'all enjoyed this tutorial!

7 comments:

  1. This is so beautiful and creative. Love your blog <3

    Lorraine // Laurel Crowned

    ReplyDelete
    Replies
    1. Thanks so much, Lorraine! I've seen you around, but I haven't checked out your blog yet, until now, that is. :)

      Delete
  2. This is so beautiful and creative. Love your blog <3

    Lorraine // Laurel Crowned

    ReplyDelete

I love comments, so please do comment! The more the merrier! I try to reply to every one. Please remember to be respectful, kind, lovable, and huggable!